IviFgen Send Software Hold Trigger [HT] VI

IviFgenHoldTrigger [HT] Capability Group

This VI sends a software-generated hold trigger to the function generator. Call this VI if you pass IVIFGEN_VAL_SOFTWARE_TRIG for the trigger source of the IviFgen Configure Trigger Source [TRG] VI. If the trigger source is not set to software trigger, this VI returns the error IVIFGEN_ERROR_TRIGGER_NOT_SOFTWARE.

Note  This VI does not normally check the instrument status. Typically, you call this VI only in a sequence of calls to other low-level driver VIs. The sequence performs one operation. You use the low-level VIs to optimize one or more aspects of interaction with the instrument. If you want to check the instrument status, call the IviFgen Error-Query VI at the conclusion of the sequence.

	instrument handle The instrument handle that you obtain from the IviFgen Initialize or IviFgen Initialize With Options VI.
	instrument handle out The instrument handle that you obtain from the IviFgen Initialize or IviFgen Initialize With Options VI.
	error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
	error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.